(uff-fee-tsee): model of perfection
Ceiling/Pot Lights
by sadil on November 15, 2008
Your Ad Here
Your Ad Here
About The Project

Installed by professionals. Eliminates use of multiple lamps and ensures uniform lighting throughout the room. Cost includes 6 pot lights and labor. Study different pot lights and do not use low quality ones to save money. Cheap pot lights can overheat and cause a fire that can spread throughout the ceiling.

Details

Category: Living Room

Approx. Cost: 500 CDN

Est. Duration: 8 hours

Difficulty: Professional

Keywords:
Pot
Spot
Lighting
Lamp
Ceiling

Login to rate this project
view original
5,347 views
1 rating
1 Image
1 |
2 Comments
Unfortunatly, the advice I gave was due to my experience. I believe you can grab these lights for $10 - 15 each. Hence, I have had problems with the amount of heat generated. However, though these lights are pretty cheap, they have some kind of cut-off inside that shuts the light down if the light overheats. The light then turns on again once it cools down. Interesting feature, but I would recommend higher quality lights. Lastly, be sure to find out which lights the contractor is using if the lights are provided by them. Do a little bit of research and find out how well the light performs from online reviews and opinions.
November 20, 2008 at 12:56am
Nice advice. For $500 its not a bad idea to get it professionally done. What was the cost of the lights alone?
November 18, 2008 at 6:34pm
1 |
© Uffize. All Rights Reserved Feedback | Contact | Advertise | Terms